DY2015 Automotive Battery Tester Electric Vehicle Battery Capacity Tester 12V 60A Battery System Meter

Operating procedures:

• 1, the tester red and black clamps to the tested battery, the red positive black negative, the tester display will show the boot screen, press OK to continue down (Note: test the battery voltage is lower than 6.0V or less can not be normal test).
• 2. The tester prompts, select: Enter the selection criteria: refers to the battery factory labeling standard, just above or in front of the battery can be seen, the standard can be selected on the battery label, such as CCA, BCI, DIN and so on.
• 3.Rated Capacity choice: refers to the battery factory starting current standard, just above or in front of the battery can be seen, such as 300A.
• 4.Press the OK button to begin the test.n the internal resistance, for the same cell, the smaller the resistance, the better health status (except for short), can be used as the inner resistance of the battery performance of a certain status criteria reference.

Specifications:

• Detection Battery capacity range:5-80Ah
• Voltage accuracy:± 1% 2d
• The maximum voltage value:DCV19.9V
• Battery capacity mode:5/10/20/30/40/50/60/70 / 80Ah
• Relative Ambient temperature:0-55C
• Relative humidity:≤80%

• DY2015 Automotive Battery Tester Electric Vehicle Battery Capacity Tester 12V 60A Battery System Meter
• 480x370x463mm
• 20pcs/ctn
• 13kgs
• 12gks

• Port:Hong Kong, Guangzhou, Ningbo, Shenzhen
• Lead Time :3 to 5 working days

User Manual Click Here:

• DY2015 User Manual